Whirlpool bath is the best solution for relieving all your stress as well as relaxing tired, sore and achy muscles. It will be more convenient to have a whirlpool (which is also known as massasjebad in the Norwegian language) bathtub in the privacy of your own home rather than using a hot tub at some gym or fitness center. Actually, learning o how to operate this whirlpool bathtub is quite simple.
Just take a look at the following steps and you will get the glorious experience.
The first step is to set the water temperature for your bath. Based on the make and the model of your whirlpool, the temperature control may consist of the simple knob or an intricate electronic control panel. For getting the best result, you need to set the temperature between 100 and 102 degrees F.
You can buy a thermometer from the local pool supply store for monitoring the temperature in your whirlpool bath if necessary. The second step is to fill your tub with the water set to your temperature preference. You should run the water for at least two inches higher than your highest jet of the tub or water level sensor.
The third step is to climb into your whirlpool bathtub carefully. You need to hold onto something sturdy while you are getting into the tub in order to avoid slipping. Then, you can sit down in your bathtub and make yourself comfortable.
The fourth step is to press the "On/Off" control which is commonly located on the side of the tub for turning on the pump and starting the whirlpool jets. Just wait for up to a minute while the pump primes. After the pump is primed, you can find that the jet will activate.